Building & water infrastructure
Continuous waterproofing for roofs, underground structures, pools, reservoirs and water facilities.
APPLICATION SOLUTIONS
Protection built around the application.
Match the substrate, exposure and application method
with a primer, polyurea coating and protective finish.
Industrial corrosion protection
Systems for pipes, steelwork, tanks and wastewater facilities, selected for the corrosive environment.
Wear-resistant floors & linings
Abrasion protection for workshops, car parks, grain stores, truck beds and mining equipment.
Detailing & repairs
Hand application on horizontal and vertical surfaces, pipe joints, foam sculptures and coating repairs.
APPLICATION GUIDE
Five stages of single-component application.
01 / Define service conditions
Specify the substrate, area, indoor or outdoor exposure, colour and service requirements to select the grade and system.
02 / Prepare the surface
Remove laitance, dust, oil and loose material, and repair defects. Derust metal in accordance with the coating system.
03 / Trial and prime
Check compatibility and adhesion in a representative trial area. Select a suitable primer and treat pores and details.
04 / Apply controlled coats
Follow the instructions for tools, coat thickness and recoating intervals. Check corners, overlaps and terminations.
05 / Cure and inspect
Allow the specified curing period and inspect appearance, thickness and required properties before putting the coating into service.
This overview supports project planning and does not replace grade-specific instructions. Follow the safety data sheet for protective equipment and ventilation.